Will it fit your garage?
Answer a few questions. This takes about a minute.
What a suitable floor looks like

Suitable. Level floor, the door closes flush.

Not suitable. Recessed channel or weather lip.

Not suitable. Uneven or cracked threshold.
Made in Canada, certified to CSA C22.2 No. 227.3:25 and UL 1696
Free shipping in Canada
Answer a few questions. This takes about a minute.

Suitable. Level floor, the door closes flush.

Not suitable. Recessed channel or weather lip.

Not suitable. Uneven or cracked threshold.
This is the most common type in North America. It rolls up in sections along tracks. If your whole door lifts out in one piece (up-and-over), Pro Protect is not for it.
The door has to seal against a flat floor. A raised lip, a channel or a slope where the door lands means Pro Protect will not seal properly.
Measure across the thickest part of the cable, not around it.
Hold a ruler or tape measure across the thickest part of the cable. Pro Protect takes cables up to 0.9 in.
Look at the end of the seal, where you can see its shape. Your current seal is likely too small (less than 4 inches wide) and will need replacing. Pro Protect needs a bottom seal 4 inches wide or wider, and the shape of yours matters.
Take a close-up of the bottom of your door, from the side, so the shape of the seal shows.
What we saw
Look for
You do not need to know the exact type. Any garage door company can tell by looking.
Call a local garage door company (opens in a new tab)Or order online from
This only checks your seal. The door type, floor and cable size matter too.